Horizontal filter press (sparkler type) is used for crystal clear filtration of Pharmaceuticals. Chemicals, Beverages, Oil, Ink and other products. Our pharmaceutical filter press consists of a filter cartridge assembly with stainless steel filter plates, support screens interlocking cups. SS pressure vessel with lid. SS pump etc. It is mounted on SS trolley with castor wheels for mobility. The liquid is pumped into the vessel where it enters into the individual plates and filtered through the filter cloth or paper and comes out through a central channel formed by interlocking cups. The cake formed between the plates can be obtained if required. It can be provided with different types of pumps depending on the viscosity of liquid and output i.e. Centrifugal pump, Gear pump, Lobe pump etc. All contact parts in SS 304/316 quality & mirror polished. MS/SS jacket can be provided for hot filtration.

Suitable for washing of different sizes of glass/metal bottles from inside and outside. These bottle washing machines are completely GMP model with all contact parts in SS 304 and works on geneva mechanism. It consists of a rotary platform with specially designed cups to accommodate any size of bottles from 50 ml. Bottles are washed internally and externally at four different stations. The unit is provided with gear box, motor. SS pumps & SS tanks. Output can be between 75 to 100 bottles per minute with the help of variable speed pulley. Manual loading and unloading of the bottles. 

Each washing station is controlled by separate solenoid valve. Machine can be supplied in MS or SS body. Machine works on geneva mechanism and designed for minimum maintenance. No contamination of waters because of different washing nozzles. Washing sequence can be interchanged as per requirement. One tanks of 75 ltr. Capacity for fresh/DM water and one tank is provided with heater thermostat control and hot valve for detergent/hot water two pumps for pressurized water jet for internal and external cleaning. Top hood, bottle platform, nozzles and all contact parts in SS 304 quality. 

Most suitable for continuous processing or batch recycle of product. It consists of stator and rotor assembly. Rotor shaft is directly coupled to motor. Mechanical seal is provided at shaft entry. Our high shear mixer can be provided with different types of stator for various applications in pharmaceutical, chemical, cosmetic, rubber, paint & other industries. Capacity: 0.5 HP to 15 Hp (Standard and GMP Model) with SS 304 or SS 316 contact parts.
 

This semi automatic volumetric liquid filling machines is two head, table top, fully GMP model used to fill variety of liquids. Semi automatic volumetric liquid filling machine can be used for different types of glass. Plastic. Metal containers. The semi automatic volumetric liquid filling machine and tube filling machine works on volumetric principle and is fitted with two syringes on the sides. The motor and gear box are covered in a SS cabinet. The desired volume can be adjusted by increasing or decreasing the eccentricity. Bottles are kept bellow the nozzles manually. Output: 8/16/24 bottles per minute depending on type liquid and fill size with the help of three speed pulley arrangement. Four head machine can also be provided. 

Stirrer consists of different types of impeller fixed on a SS shaft and directly coupled to an electric motor. It can be directly mounted on the vessel or can be fixed on a separate movable stand with lowering and lifting arrangement. Fixed RPM or with variable AC frequency drive or with geared motor. Capacity: 0.25 HP to 15 HP (Standard and GMP model) with SS 304 or SS 316 contact parts.

This is used for mixing, suspending, milling, dispersing, disintegrating solids etc. & reduces batch time. It consists of stator and rotor assembly. The rotor rotates inside the stator assembly which is fixed with three tie rods to the motor. Rotor shaft is directly coupled to motor. It can be directly mounted on the vessel or can be hanged an a separate movable stand with lowering and lifting arrangement. Capacity: 0.25 HP to 15 HP (Standard and GMP Model) with SS 304 or SS 316 contact parts.

We specialize in manufacturing automatic liquid filling machines which are generally used in fill any type of liquid. 

Features:-
Easy operations
High performance
Corrosion resistance
Durable

Our specifically engineered automatic ROPP capping machine is suitable for cap sealing purposes in various industries. This machine is renowned for it's low noise and accurate functioning. It is highly durable, long lasting and cost effective in nature.